How much does a burglar alarm cost in Teesside?

£400 to £800 fitted for a wired system on a typical house, with the detector and door count deciding where you land. Larger properties with garages, conservatories or outbuildings run higher.

How many detectors does an average house need?

Most three-bedroom homes are covered by contacts on the two external doors plus detectors in the hall, landing and main living room. Rooms nobody has to cross to reach the stairs are often left out on purpose.

Will I get the engineer code?

You should, and it is worth asking before signing. A panel left locked to one company means any future work has to go back through them, which is a needless expense on a system you own.

Does it need to be Grade 2?

Grade 2 to BS EN 50131 is the normal domestic specification and the one insurers recognise. Higher grades exist for commercial and high-risk sites, and a good quote states the grade rather than leaving it vague.

Burglar alarm installation in Teesside

A burglar alarm on a typical Teesside house costs £400 to £800 fitted in 2026: control panel, keypad, external sounder, door contacts and movement detectors, set up to Grade 2 and handed over with the codes in your name.

Get Quote From £400

Illuminated alarm keypad mounted beside a door

What actually gets fitted

A domestic burglar alarm is a small network of parts doing one job between them. The control panel is the brain, usually tucked in a cupboard or hallway. A keypad by the door you use most sets and unsets it. An external sounder on the front or side elevation makes the noise and shows the house is protected. Magnetic contacts sit on external doors so an opening triggers immediately, and passive infrared detectors cover the rooms an intruder has to cross: hallway, landing, living room, and often the kitchen or conservatory on Teesside's extended semis.

What the price covers

The survey and design: a walk round the property that decides how many zones you need before anyone quotes a number.
Equipment and installation: panel, keypad, sounder, contacts and detectors supplied and fitted, cables run through lofts and voids and kept out of sight.
Setting to standard: Grade 2 to BS EN 50131 or PD 6662 for most homes, with the grade written on the paperwork.
Handover: user codes set up in your name, the engineer code released to you, and a walk through of how to arm part of the house at night.
Warranty: parts and labour cover stated in writing, typically twelve months upward on new kit.

What moves the price

Coverage is the main driver: a two-detector, two-contact set-up on a small terrace sits near £400, while a four-bed detached with an integral garage, conservatory and separate side entrance climbs toward £800 once the zone count rises. Property age matters for cabling, because Victorian and Edwardian houses in Linthorpe or the Hartlepool Headland often need careful routing that a 1990s estate house does not. Pets change the specification too, since a household with dogs needs pet-tolerant detectors rather than standard ones. And the alerting choice sits on top: bells only is the base, app notification adds a communicator, and monitoring adds an annual contract you should see priced separately. The cost guide works through the examples.

Wired, and why it still sells

Wired alarms remain the choice for new builds, extensions, renovations where floors are already up, and anyone who dislikes changing batteries. The kit draws its power and signal from cable, so there is no battery cycle across a dozen devices and no radio interference to design around. The trade-off is disruption in a finished house, which is exactly where wireless systems win. The comparison guide takes the question apart properly rather than picking a favourite.